Special Features
Areas of Application
|
TRUMPF is the only manufacturer to offer a series of Nibblers, that can handle any sheet thickness between the 1/32" and 3/8" range. Two different types of tool systems are available for fast, safe cutting of a variety of materials such as mild steel, stainless steel, non-ferrous metals and plastics in different thicknesses. This allows distortion-free cutting, easy guidance, economical operation and excellent performance. For the sheet thickness range under .14 inch, the patented hollow round punch nibblers offer unsurpassed maneuverability, and the ability to rotate on the spot. Above the .14 inch capacity range, rectangular punches are used. TRUMPF nibblers work on the principle of a “punching” cut. Downward chip discharge guarantees a clear view of the working area. The tool can be positioned in different directions, depending on the application.
In this category we can offer you 6 products: also available in * pneumatic version |
|
|
N 160-E |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
in. .063 in. .040 in. .079 ft./min. 5.0 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 1400 in. .827 in. 1.57 Amps. 3.0 lbs. 3.7 |
|
|
|
N 200-4 * + |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
in. .079 in. .060 in. .098 ft./min. 3.6 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 1300 in. .630 in. .157 Amps. 4.3 lbs. 4.8 |
|
|
|
N 350-4 * |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
in. .140 in. .090 in. .140 ft./min. 3.9 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 640 in. 1.20 in. .280 Amps. 11.0 lbs. 8.2 |
|
|
|
N 500-6 * |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
in. .200 in. .125 in. .280 ft./min. 4.3 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 620 in. 1.60 in. 3.54 Amps. 11.0 lbs. 8.9 |
|
|
|
N 700-2 * |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
in. .276 in. .197 in. .394 ft./min. 4.3 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 260 in. 2.40 in. 5.50 W 1500 lbs. 18.3 |
|
|
|
N 1000-0 * |
Max. sheet thickness Mild steel Stainless steel Aluminum Working speed |
gear 1/2 in. .315/.394 in. .200/.276 in. .394/.472 ft./min. 3.3/5.2 |
Strokes at nominal load Smallest starting hole Smallest radius Motor rating Weight |
per min. 190/330 in. 2.95 in. 11.8 Amps. 17.4 lbs. 26.0 |
